0.4ct Round (4.79×4.79×2.89) vs 0.6ct Round (5.48×5.48×3.3)

Diamond size comparison

Actual size is set for screen Change
Actual size of 0.4ct Round diamond
Actual size
sample image
vs.
Actual size of 0.6ct Round diamond
Actual size
sample image
0.4 ct Round (4.79×4.79×2.89mm) 0.6 ct Round (5.48×5.48×3.3mm)
Cutting style
Brilliant
Brilliant
Weight
0.4 ct
0.6 ct
Measurements
4.79×4.79×2.89 mm
5.48×5.48×3.3 mm
Total depth
60.3% OK
60.2% OK
L/W ratio
1
1
Face-up size
Adequate
Adequate
 
This diamond LOOKS its weight!
This diamond LOOKS its weight!
Actual diamond size
Actual diamond size
Before purchasing a diamond, one should make sure it looks its weight. It's important to understand that carat weight does not equal face-up size.

Two diamonds of exactly the same weight (and shape) can vary quite considerably in face-up size. This depends on the proportions of the cut (e.g., deep cuts will face up smaller).

Here you can see the actual sizes of 0.4ct Round (4.79×4.79×2.89mm) and 0.6ct Round (5.48×5.48×3.3mm) as they would appear on a ring and finger.

Adjust the ring and finger size to get an idea of how these stones would look on your finger.
Settings
Ring: Skin tone:
Ring width: 3.0 mm
Saved...
Left finger image
Ring on a left finger
0.4ct Round on a left ring
64 mm
Right finger image
Ring on a right finger
0.6ct Round on a right ring
Your settings
Ring
Gold
Skin tone
Light
Ring diameter
16.9 mm
Ring width
3.0 mm
Finger length
64 mm
Saved...
Ring diameter: 16.9 mm
USA UK Asia EU1 EU2
0.4ct Round side view Side view of ring
vs
0.6ct Round side view Side view of ring
Actual size is set for screen Change
Face-up area
18.02 mm² 
23.59 mm² 
Face-up area is a measure of the size of the diamond when viewed from the top (as set in a ring).

It tells you how big the diamond is at the girdle plane. It's important for a diamond to have sufficient face-up size for its carat weight.
Face-up size outline
Face-up size outline
0.4ct Round (4.79×4.79×2.89mm)
0.6ct Round (5.48×5.48×3.3mm)
Difference: 5.57mm² (31%)
0.6 carat Round (5.48×5.48×3.3mm) has approx. 31% more face-up area than 0.4 carat Round (4.79×4.79×2.89mm).
Face-up area per carat
45.05 mm²/ct
39.32 mm²/ct
To learn about the accuracy of these numbers, click here.


Quick Buying Guide

Diamond prices vary greatly as they depend on the combination of unique characteristics (4Cs - Cut, Color, Clarity, and Carat). For best value, it's important to choose the combination that will reduce the price without having a negative impact on appearance.

Each shape has its own recommended balance of qualities that will give you the most bang for your buck. With Rounds, for example, you can go relatively low in terms of color and clarity without compromising on beauty. However, you should never skimp on the cut. Below is a quick buying guide to give you an idea, but for more detailed explanation, please see the complete buying guides for the respective diamonds (links below).
0.4ct Round (4.79×4.79×2.89mm)
0.6ct Round (5.48×5.48×3.3mm)
Price (best value)
Min. clarity
SI or better
SI or better
Min. color (platinum setting)
J+
J+
Min. color (yellow gold setting)
K+
K+
Depth percentage
58 - 62.5%
58 - 62.5%
Table percentage
53 - 58%
53 - 58%
Length-to-width ratio
1.00 - 1.02
1.00 - 1.02
Min. polish/symmetry
Good or better
Good or better
 Detailed buying guide

Additional Info

0.4ct Round (4.79×4.79×2.89mm)
0.6ct Round (5.48×5.48×3.3mm)
Face-up size
Normal for 0.4 carat Round
Normal for 0.6 carat Round
Facets
58 (57 if no culet)
58 (57 if no culet)
Length
4.79 mm
5.48 mm
Width
4.79 mm
5.48 mm
Depth
2.89 mm
3.3 mm
Gram weight
0.08 g (0.0028 ounces)
0.12 g (0.0042 ounces)
Points
40 pts
60 pts
Volume
22.73 mm³
34.09 mm³


Compare diamonds

Choose diamonds to compare:
 
× ×
carat vs. length* width* depth*
× ×
 
* Optional

Depth percentage for 0.4 carat Round (4.79×4.79×2.89mm)

Depth percentage of Round cut is the ratio of the total depth (measured from table to culet) to its average diameter. The total depth percentage of this diamond is 60.3%, which is OK. (Recommended depth percentage for Rounds is between 58% and 62.5%)

Depth percentage for rounds is calculated with the following formula:
Depth % = (total depth ÷ average diameter) × 100

0.4 carat Round (4.79×4.79×2.89mm) depth %:
Total depth: 2.89 mm
Average diameter = (4.79 + 4.79) ÷ 2 = 4.79 mm
Depth % = (2.89 ÷ 4.79 ) × 100 = 60.3%

Depth percentage for 0.6 carat Round (5.48×5.48×3.3mm)

Depth percentage of Round cut is the ratio of the total depth (measured from table to culet) to its average diameter. The total depth percentage of this diamond is 60.2%, which is OK. (Recommended depth percentage for Rounds is between 58% and 62.5%)

Depth percentage for rounds is calculated with the following formula:
Depth % = (total depth ÷ average diameter) × 100

0.6 carat Round (5.48×5.48×3.3mm) depth %:
Total depth: 3.3 mm
Average diameter = (5.48 + 5.48) ÷ 2 = 5.48 mm
Depth % = (3.3 ÷ 5.48 ) × 100 = 60.2%

About Depth Percentage
Depth percentage is one of the most important measurements as it plays a critical role in diamond's appearance. If a diamond is cut too deep or too shallow, light leaks out, making the stone less brilliant and fiery. Deep cuts also add hidden weight.

Diamonds that fall out of recommended depth range are generally less desirable and usually best to be avoided.


Face-up size evaluation for 0.4 carat Round (4.79×4.79×2.89mm)

The face-up size of this 0.4 carat Round (4.79×4.79×2.89mm) is within the normal range for 0.4ct diamonds of this shape. Compared to 0.4ct Round reference diamond (see below), this diamond is of adequate size when viewed from the top. In short, all is OK, this diamond looks its weight.

The importance of face-up size
Diamonds are sold by weight (carats), but it's important to understand that weight doesn't equally translate into physical size, especially spread. Two diamonds of the same carat weight can vary greatly in spread, meaning that one diamond can appear larger than the other, even though they weight exactly the same.

Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. Adequate size also indicates a good cut, meaning better light performance. You probably wouldn't want a poorly cut 0.4ct Round that is less sparkly and faces up the same as a well-cut Round of a smaller weight.

The bottom line: A diamond must look its weight. This one does. Thumbs up.

0.4 carat Round reference diamond
0.4ct Round reference diamond is calculated from the following ideal proportions:
Proportions:
Table: 57%
Crown angle: 34°
Pavilion angle: 40.7°
Girdle: 2.8%
Star length: 50%
Lower half-length: 80%
Culet: None
 
Calculated values:
Depth: 60.3%
Crown height: 14.5%
Pavilion height: 43%
For 0.4 carat weight:
Diameter: 4.79 mm
Face-up area: 18.02 mm²
Note: Round diamonds with face-up area of within 5% lower and 3% higher than reference Round diamond area are considered to be of adequate face-up size.

Face-up size evaluation for 0.6 carat Round (5.48×5.48×3.3mm)

The face-up size of this 0.6 carat Round (5.48×5.48×3.3mm) is within the normal range for 0.6ct diamonds of this shape. Compared to 0.6ct Round reference diamond (see below), this diamond is of adequate size when viewed from the top. In short, all is OK, this diamond looks its weight.

The importance of face-up size
Diamonds are sold by weight (carats), but it's important to understand that weight doesn't equally translate into physical size, especially spread. Two diamonds of the same carat weight can vary greatly in spread, meaning that one diamond can appear larger than the other, even though they weight exactly the same.

Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. Adequate size also indicates a good cut, meaning better light performance. Would you want a poorly cut 0.6 carat diamond that is less sparkly and has the same face-up size as an ideal cut 0.5 carat? Probably not.

The bottom line: A diamond must look its weight. This one does. Thumbs up.

0.6 carat Round reference diamond
0.6ct Round reference diamond is calculated from the following ideal proportions:
Proportions:
Table: 57%
Crown angle: 34°
Pavilion angle: 40.7°
Girdle: 2.8%
Star length: 50%
Lower half-length: 80%
Culet: None
 
Calculated values:
Depth: 60.3%
Crown height: 14.5%
Pavilion height: 43%
For 0.6 carat weight:
Diameter: 5.48 mm
Face-up area: 23.59 mm²
Note: Round diamonds with face-up area of within 5% lower and 3% higher than reference Round diamond area are considered to be of adequate face-up size.

Face-up Area per Carat

Face-up area per carat is calculated by dividing face-up area of the diamond with its carat weight. It tells you how many square millimeters of the top surface area a diamond is showing or would show for 1 carat weight. This can be useful when comparing stones of similar weights as it tells you how much spread per carat you will get.

Note: Face-up size does not linearly grow with carat weight, which means the heavier the stone, the smaller its face-up area per carat (e.g., 1ct stone will have higher face-up area per carat than 2ct stone).

Face-up area per carat for 0.4ct Round (4.79×4.79×2.89mm):
Top surface area = 18.02 mm²
Weight = 0.4ct

Face-up area per carat = 18.02 ÷ 0.4 = 45.05mm²/ct

Face-up area per carat for 0.6ct Round (5.48×5.48×3.3mm):
Top surface area = 23.59 mm²
Weight = 0.6ct

Face-up area per carat = 23.59 ÷ 0.6 = 39.32mm²/ct

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a diamond, ring and finger will not be shown correctly.