3.5ct Radiant (10×8×5.12) vs 3ct Pear (12×8×4.79)
Diamond size comparison
Actual size is set for screen
Change
sample image
|
vs. |
sample image
|
|||||||||
3.5 ct Radiant (10×8×5.12mm) | 3 ct Pear (12×8×4.79mm) |
Cutting style
Mixed
Modified brilliant
Weight
3.5 ct
3 ct
Measurements
10×8×5.12 mm
12×8×4.79 mm
L/W ratio
1.25
1.5
Face-up size
Adequate
Adequate
This diamond LOOKS its weight!
This diamond LOOKS its weight!
Actual diamond size
Before purchasing a diamond, one should make sure it looks its weight.
It's important to understand that
carat weight does not equal face-up size.
Two diamonds of exactly the same weight (and shape) can vary quite considerably in face-up size. This depends on the proportions of the cut (e.g., deep cuts will face up smaller).
Here you can see the actual sizes of 3.5ct Radiant (10×8×5.12mm) and 3ct Pear (12×8×4.79mm) as they would appear on a ring and finger.
Adjust the ring and finger size to get an idea of how these stones would look on your finger.
Two diamonds of exactly the same weight (and shape) can vary quite considerably in face-up size. This depends on the proportions of the cut (e.g., deep cuts will face up smaller).
Here you can see the actual sizes of 3.5ct Radiant (10×8×5.12mm) and 3ct Pear (12×8×4.79mm) as they would appear on a ring and finger.
Adjust the ring and finger size to get an idea of how these stones would look on your finger.
Settings
Ring:
Skin tone:
Ring width: 3.0 mm
Saved...
|
|
64 mm |
|
|
||||||||||||||||
|
||||||||||||||||||||
|
|
|
Actual size is set for screen
Change
Face-up area is a measure of the size of the diamond
when viewed from the top (as set in a ring).
It tells you how big the diamond is at the girdle plane. It's important for a diamond to have sufficient face-up size for its carat weight.
It tells you how big the diamond is at the girdle plane. It's important for a diamond to have sufficient face-up size for its carat weight.
3.5ct Radiant (10×8×5.12mm) | |
3ct Pear (12×8×4.79mm) | |
Difference: 5.92mm² (8%) |
3.5 carat Radiant (10×8×5.12mm) has approx. 8% more face-up area than 3 carat Pear (12×8×4.79mm).
To learn about the accuracy of these numbers, click here.
Quick Buying Guide
Diamond prices vary greatly as they depend on the combination of unique characteristics (4Cs - Cut, Color, Clarity, and Carat). For best value, it's important to choose the combination that will reduce the price without having a negative impact on appearance.
Each shape has its own recommended balance of qualities that will give you the most bang for your buck. Below is a quick buying guide to give you an idea, but for more detailed explanation, please see the complete buying guides for the respective diamonds (links below).
Each shape has its own recommended balance of qualities that will give you the most bang for your buck. Below is a quick buying guide to give you an idea, but for more detailed explanation, please see the complete buying guides for the respective diamonds (links below).
3.5ct Radiant (10×8×5.12mm)
3ct Pear (12×8×4.79mm)
Min. clarity
SI or better
SI or better
Min. color (platinum setting)
H+
H+
Min. color (yellow gold setting)
J+
J+
Depth percentage
59 - 70%
59 - 65%
Table percentage
58 - 70%
50 - 65%
Length-to-width ratio
1.00 - 1.35
1.45 - 1.75
Min. polish/symmetry
Good or better
Good or better
Additional Info
3.5ct Radiant (10×8×5.12mm)
3ct Pear (12×8×4.79mm)
Face-up size
Normal for 3.5 carat Radiant
Normal for 3 carat Pear
Facets
usually between 62 - 70
usually 58
Length
10 mm
12 mm
Width
8 mm
8 mm
Depth
5.12 mm
4.79 mm
Gram weight
0.7 g (0.0247 ounces)
0.6 g (0.0212 ounces)
Points
350 pts
300 pts
Volume
198.86 mm³
170.45 mm³
Compare diamonds
Choose diamonds to compare:
Popular comparisons:
- 3.5ct Radiant (10x8x5.12) vs. 4.4ct Radiant (10.53x8.55x6.06)
- 3.5ct Radiant (10x8x5.12) vs. 2.5ct Radiant (9x7x4.48)
- 3.5ct Radiant (10x8x5.12) vs. 4.75ct Radiant (11x9x5.76)
- 3.5ct Radiant (10x8x5.12) vs. 3ct Radiant (10x7x5.12)
- 3.5ct Radiant (10x8x5.12) vs. 5ct Radiant (11x9x5.76)
- 3.5ct Radiant (10x8x5.12) vs. 1.5ct Radiant (7x5x3.2)
- 3.5ct Radiant (10x8x5.12) vs. 3.5ct Cushion (10x8x5.12)
- 3.5ct Radiant (10x8x5.12) vs. 3.25ct Asscher (9x9x5.85)
- 3.5ct Radiant (10x8x5.12) vs. 3ct Radiant (8.33x8.33x5.33)
Depth percentage for 3.5 carat Radiant (10×8×5.12mm)
Depth percentage of Radiant cut is the ratio of the total depth (measured from table to culet)
to its width. The total depth percentage of this diamond
is 64%, which is OK.
(Recommended depth percentage for Radiants is between 59% and
70%)
Depth percentage for radiants is calculated with the following formula:
Depth percentage for radiants is calculated with the following formula:
Depth % = (total depth ÷ width) × 100
3.5 carat
Radiant
(10×8×5.12mm) depth %:
Total depth: 5.12 mm
Width = 8 mm
Width = 8 mm
Depth % = (5.12 ÷ 8 ) × 100 = 64%
Depth percentage for 3 carat Pear (12×8×4.79mm)
Depth percentage of Pear cut is the ratio of the total depth (measured from table to culet)
to its width. The total depth percentage of this diamond
is 59.9%, which is OK.
(Recommended depth percentage for Pears is between 59% and
65%)
Depth percentage for pears is calculated with the following formula:
Depth percentage for pears is calculated with the following formula:
Depth % = (total depth ÷ width) × 100
3 carat
Pear
(12×8×4.79mm) depth %:
Total depth: 4.79 mm
Width = 8 mm
Width = 8 mm
Depth % = (4.79 ÷ 8 ) × 100 = 59.9%
About Depth Percentage
Depth percentage is one of the most important measurements as it plays a critical role in diamond's
appearance. If a diamond is cut too deep or too shallow, light leaks out, making
the stone less brilliant and fiery. Deep cuts also add hidden weight.
Diamonds that fall out of recommended depth range are generally less desirable and usually best to be avoided.
Diamonds that fall out of recommended depth range are generally less desirable and usually best to be avoided.
Face-up size evaluation for 3.5 carat Radiant (10×8×5.12mm)
The face-up size of this 3.5 carat Radiant
(10×8×5.12mm) is within the normal range for
3.5ct diamonds of this shape.
Compared to 3.5ct
Radiant reference diamond (see below), this diamond is of adequate
size when viewed from the top. In short, all is OK, this diamond looks its weight.
Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. Adequate size also indicates a good cut, meaning better light performance. For example, if given a choice between a poorly cut 3.5 carat Radiant with less sparkle and the same face-up size as a well cut 3.2ct Radiant, which one would you choose?
The importance of face-up size
Diamonds are sold by weight (carats), but it's important to understand that weight doesn't equally translate into physical size, especially spread. Two diamonds of the same carat weight can vary greatly in spread, meaning that one diamond can appear larger than the other, even though they weight exactly the same.Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. Adequate size also indicates a good cut, meaning better light performance. For example, if given a choice between a poorly cut 3.5 carat Radiant with less sparkle and the same face-up size as a well cut 3.2ct Radiant, which one would you choose?
The bottom line:
A diamond must look its weight. This one does. Thumbs up.
3.5 carat Radiant reference diamond
Since there are no specific ideal proportions defined for Radiant cuts,
an estimation formula is used to calculate the Radiant reference diamond.
|
|
Note: Radiant diamonds with face-up area of within 9% lower
and 12% higher than reference Radiant diamond area
are considered to be of adequate face-up size.
* Estimated Face-up area: Face-up area of Radiant cuts
is only an estimation (±4%). Due to uniqueness of each stone,
it's impossible to accurately calculate face-up area given only a diamond's measurements.
Face-up size evaluation for 3 carat Pear (12×8×4.79mm)
The face-up size of this 3 carat Pear
(12×8×4.79mm) is within the normal range for
3ct diamonds of this shape.
Compared to 3ct
Pear reference diamond (see below), this diamond is of adequate
size when viewed from the top. In short, all is OK, this diamond looks its weight.
Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. Adequate size also indicates a good cut, meaning better light performance. For example, if given a choice between a poorly cut 3 carat Pear with less sparkle and the same face-up size as a well cut 2.7ct Pear, which one would you choose?
The importance of face-up size
Diamonds are sold by weight (carats), but it's important to understand that weight doesn't equally translate into physical size, especially spread. Two diamonds of the same carat weight can vary greatly in spread, meaning that one diamond can appear larger than the other, even though they weight exactly the same.Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. Adequate size also indicates a good cut, meaning better light performance. For example, if given a choice between a poorly cut 3 carat Pear with less sparkle and the same face-up size as a well cut 2.7ct Pear, which one would you choose?
The bottom line:
A diamond must look its weight. This one does. Thumbs up.
3 carat Pear reference diamond
Since there are no specific ideal proportions defined for Pear cuts,
an estimation formula is used to calculate the Pear reference diamond.
|
|
Note: Pear diamonds with face-up area of within 9% lower
and 12% higher than reference Pear diamond area
are considered to be of adequate face-up size.
* Estimated Face-up area: Face-up area of Pear cuts
is only an estimation (±4%). Due to uniqueness of each stone,
it's impossible to accurately calculate face-up area given only a diamond's measurements.
Face-up Area per Carat
Face-up area per carat is calculated by dividing face-up area of the diamond with
its carat weight. It tells you how many square millimeters of the top surface area
a diamond is showing or would show for 1 carat weight. This can be useful when comparing stones
of similar weights as it tells you how much spread per carat you will get.
Note: Face-up size does not linearly grow with carat weight,
which means the heavier the stone, the smaller its face-up area per carat (e.g., 1ct stone will have
higher face-up area per carat than 2ct stone).
Face-up area per carat
for 3.5ct Radiant (10×8×5.12mm):
Top surface area = 76 mm²
Weight = 3.5ct
Face-up area per carat = 76 ÷ 3.5 = 21.71mm²/ct
Weight = 3.5ct
Face-up area per carat = 76 ÷ 3.5 = 21.71mm²/ct
Face-up area per carat
for 3ct Pear (12×8×4.79mm):
Top surface area = 70.08 mm²
Weight = 3ct
Face-up area per carat = 70.08 ÷ 3 = 23.36mm²/ct
Weight = 3ct
Face-up area per carat = 70.08 ÷ 3 = 23.36mm²/ct
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a diamond, ring and finger will not be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a diamond, ring and finger will not be shown correctly.