0.13 Carat Trillion (4×4×1.33mm) vs. 0.13 Carat Cushion (3×3×2mm)

Diamond comparison

Actual size is set for screen Change
Actual size of 0.13ct Trillion diamond
Actual size
sample image
vs.
Actual size of 0.13ct Cushion diamond
Actual size
sample image
0.13 ct Trillion (4×4×1.33mm) 0.13 ct Cushion (3×3×2mm)
Price
n/a
Cutting style
Modified brilliant
(modified) brilliant
Weight
0.13 ct
0.13 ct
Measurements
4×4×1.33 mm
3×3×2 mm
Total depth
33.3% OK
66.7% OK
L/W ratio
1
1
Face-up size
Adequate
Adequate
 
This diamond LOOKS its weight!
This diamond LOOKS its weight!
Actual diamond size
Actual diamond size
Before purchasing a diamond, one should make sure it looks its weight. It's important to understand that carat weight does not equal face-up size.

Two diamonds of exactly the same weight (and shape) can vary quite considerably in face-up size. This depends on the proportions of the cut (e.g., deep cuts will face up smaller).

Here you can see the actual sizes of 0.13ct Trillion (4×4×1.33mm) and 0.13ct Cushion (3×3×2mm) as they would appear on a ring and finger.

Adjust the ring and finger size to get an idea of how these stones would look on your finger. To choose different diamonds or to change diamond parameters click here.

Compare prices and availability from recommended online vendors:


Settings
Ring: Skin tone:
Ring width: 3.0 mm
Saved...
Left finger image
Ring on a left finger
0.13ct Trillion on a left ring
64 mm
Right finger image
Ring on a right finger
0.13ct Cushion on a right ring
Your settings
Ring
Gold
Skin tone
Light
Ring diameter
16.9 mm
Ring width
3.0 mm
Finger length
64 mm
Saved...
Ring diameter: 16.9 mm
USA UK Asia EU1 EU2
0.13ct Trillion side view Side view of ring
vs
0.13ct Cushion side view Side view of ring
Actual size is set for screen Change
Face-up area
9.92 mm²  (±9%)
8.1 mm²  (±5%)
Face-up area is a measure of the size of the diamond when viewed from the top (as set in a ring).

It tells you how big the diamond is at the girdle plane. It's important for a diamond to have sufficient face-up size for its carat weight.
Face-up size outline
Face-up size outline
0.13ct Trillion (4×4×1.33mm)
0.13ct Cushion (3×3×2mm)
Difference: 1.82mm² (22%)
0.13 carat Trillion (4×4×1.33mm) has approx. 22% more top surface area than 0.13 carat Cushion (3×3×2mm).
Face-up area per carat
76.31 mm²/ct
62.31 mm²/ct
To learn about the accuracy of these numbers, click here.

Quick Buying Guide

0.13ct Trillion (4×4×1.33mm)
0.13ct Cushion (3×3×2mm)
Min. clarity
SI or better
SI1 or better
Min. color (platinum solitaire)
H+
H+
Depth percentage
32 - 48%
59 - 70%
Table percentage
50 - 70%
56 - 70%
Length-to-width ratio
1.00 - 1.10
1.00 - 1.35
Min. polish/symmetry
Good or better
Good or better
 Detailed buying guide

Additional Info

0.13ct Trillion (4×4×1.33mm)
0.13ct Cushion (3×3×2mm)
Face-up size
Normal for 0.13 carat Trillion
Normal for 0.13 carat Cushion
Facets
Between 31 - 50
usually 58
Length
4 mm
3 mm
Width
4 mm
3 mm
Depth
1.33 mm
2 mm
Gram weight
0.03 g (0.0009 ounces)
0.03 g (0.0009 ounces)
Points
13 pts
13 pts
Volume
7.39 mm³
7.39 mm³


Compare diamonds

Choose diamonds to compare:
 
× ×
carat vs. length* width* depth*
× ×
 
* Optional

More comparisons:

Depth percentage for 0.13 carat Trillion (4×4×1.33mm)

Depth percentage of Trillion cut is the ratio of the total depth (measured from table to culet) to its width. The total depth percentage of this diamond is 33.3%, which is OK. (Recommended depth percentage for Trillions is between 32% and 48%)

Depth percentage for trillions is calculated with the following formula:
Depth % = (total depth ÷ width) × 100

0.13 carat Trillion (4×4×1.33mm) depth %:
Total depth: 1.33 mm
Width = 4 mm
Depth % = (1.33 ÷ 4 ) × 100 = 33.3%

Depth percentage for 0.13 carat Cushion (3×3×2mm)

Depth percentage of Cushion cut is the ratio of the total depth (measured from table to culet) to its width. The total depth percentage of this diamond is 66.7%, which is OK. (Recommended depth percentage for Cushions is between 59% and 70%)

Depth percentage for cushions is calculated with the following formula:
Depth % = (total depth ÷ width) × 100

0.13 carat Cushion (3×3×2mm) depth %:
Total depth: 2 mm
Width = 3 mm
Depth % = (2 ÷ 3 ) × 100 = 66.7%

About Depth Percentage
Depth percentage is one of the most important measurements as it plays a critical role in diamond's appearance. If a diamond is cut too deep or too shallow, light leaks out, making the stone less brilliant and fiery. Deep cuts also add hidden weight.

Diamonds that fall out of recommended depth range are generally less desirable and usually best to be avoided.


Face-up size evaluation for 0.13 carat Trillion (4×4×1.33mm)

The face-up size of this 0.13 carat Trillion (4×4×1.33mm) is within the normal range for 0.13ct diamonds of this shape. Compared to 0.13ct Trillion reference diamond (see below), this diamond is of adequate size when viewed from the top.

Diamonds are sold by weight (carats), but it's important to understand that weight doesn't equally translate into physical size, especially spread. Two diamonds of the same carat weight can vary greatly in spread, meaning that one diamond can appear larger than the other, even though they weight exactly the same.

Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. You probably don't want a 0.13 carat Trillion that looks like a poorly cut 0.11ct.

The bottom line: A diamond must look its weight. This one does.

0.13 carat Trillion reference diamond

Since there are no specific ideal proportions defined for Trillion cuts, an estimation formula is used to calculate the Trillion reference diamond.
Parameters:
Weight: 0.13ct
Depth: 40%
L/W ratio: 1
 
Calculated values:
Length: 3.92 mm
Width: 3.92 mm
Depth: 1.57 mm
*Est. face-up area: 9.53 mm²
Note: Trillion diamonds with face-up area of within 13% lower and 16% higher than reference Trillion diamond area are considered to be of adequate face-up size.
* Estimated Face-up area: Face-up area of Trillion cuts is only an estimation (±9%). Due to uniqueness of each stone, it's impossible to accurately calculate face-up area given only a diamond's measurements.
To learn more about diamond size evaluation, click here.


Face-up size evaluation for 0.13 carat Cushion (3×3×2mm)

The face-up size of this 0.13 carat Cushion (3×3×2mm) is within the normal range for 0.13ct diamonds of this shape. Compared to 0.13ct Cushion reference diamond (see below), this diamond is of adequate size when viewed from the top.

Diamonds are sold by weight (carats), but it's important to understand that weight doesn't equally translate into physical size, especially spread. Two diamonds of the same carat weight can vary greatly in spread, meaning that one diamond can appear larger than the other, even though they weight exactly the same.

Proper face-up size should play an important role when buying a diamond. When a diamond is set in a ring, your eyes will only see the face-up area, so you should make sure it's of adequate size. You probably don't want a 0.13 carat Cushion that looks like a poorly cut 0.11ct.

The bottom line: A diamond must look its weight. This one does.

0.13 carat Cushion reference diamond

Since there are no specific ideal proportions defined for Cushion cuts, an estimation formula is used to calculate the Cushion reference diamond.
Parameters:
Weight: 0.13ct
Depth: 64%
L/W ratio: 1
 
Calculated values:
Length: 2.95 mm
Width: 2.95 mm
Depth: 1.89 mm
*Est. face-up area: 7.83 mm²
Note: Cushion diamonds with face-up area of within 9% lower and 12% higher than reference Cushion diamond area are considered to be of adequate face-up size.
* Estimated Face-up area: Face-up area of Cushion cuts is only an estimation (±5%). Due to uniqueness of each stone, it's impossible to accurately calculate face-up area given only a diamond's measurements.
To learn more about diamond size evaluation, click here.


Face-up Area per Carat

Face-up area per carat is calculated by dividing face-up area of the diamond with its carat weight. It tells you how many square millimeters of the top surface area a diamond is showing or would show for 1 carat weight. This can be useful when comparing stones of similar weights as it tells you how much spread per carat you will get.

Note: Face-up size does not linearly grow with carat weight, which means the heavier the stone, the smaller its face-up area per carat (e.g., 1ct stone will have higher face-up area per carat than 2ct stone).

Face-up area per carat for 0.13ct Trillion (4×4×1.33mm):
Top surface area = 9.92 mm²
Weight = 0.13ct

Face-up area per carat = 9.92 ÷ 0.13 = 76.31mm²/ct

Face-up area per carat for 0.13ct Cushion (3×3×2mm):
Top surface area = 8.1 mm²
Weight = 0.13ct

Face-up area per carat = 8.1 ÷ 0.13 = 62.31mm²/ct

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a diamond, ring and finger will not be shown correctly.